This is a demo store. No orders will be fulfilled.
Osmio Zero Reverse Osmosis Replacement Filters Pack for Hard Water
- Buy 2 for £49.80 each and save 17%
- Buy 4 for £45.00 each and save 25%
Please note this pack for for Osmio Zero version predating April 2024, which uses the sediment filter inside the supply tank. The latest version of Osmio Zero 2.0 has a new supply tank with no sediment filter.
Replacement filters pack for the Osmio Zero-IP-II Portable Reverse Osmosis Water Filter System from Osmio Water for Hard water area. Designed for hard water areas with hardness over 200 ppm.
Please note the carbon block filter has been upgraded to the Polyphosphate impregnated composite carbon filter.
Osmio Zero Reverse Osmosis Replacement Filters Pack
Buy the replacement filters pack for the Osmio Zero Reverse Osmosis Water Filter System from Osmio Water with free and fast delivery.
If you have a hardness level over 250 Calcium Carbonate then you may need to change the carbon block and membrane more frequently than every 6 months. The unit is designed to shut off if there is blockage in the membrane or prefilters. As the system recirculates the rejected water from the membrane, the TDS level continually rises of the water entering the membrane filter. Therefore, for those with water of higher TDS, more frequent carbon block and membrane changes are likely. It is recommended to have at least a spare carbon filter and membrane on hand with the unit at all times.
Filter Stages:
1 - Quick-Change Sediment Filter 5μm: removes coarse particles, e.g. Sand, rust, chlorine, lime
2 - Quick-Change 1 mic Composite Carbon filter: removes chlorine and organic impurities, helps to inhibit limescale
3 - Quick-Change Membrane 50GPD: removes all pollutants and flavours to almost 100%
4 - Quick-Change Insertion Filters: Hygiene After-filter antibacterial: removes 99% of the bacteria and viruses and improves the taste
How to recycle and dispose of Osmio Zero water filters
Quick-Change activated carbon filter and Quick-Change membrane 50GPD filter: these two filters can be placed in plastics recycling. However, the bottom of the filters will first need to be cut open using a hacksaw. The carbon and membrane elements can then be removed and thrown into the bin before placing the filters in recycling.
Quick-Change Sediment filter: This can simply be placed into the plastics recycling.
Quick-Change Insertion filter: This filter should again be cut in half and the contents emptied out into the bin before recycling the plastic exterior.
Model | Osmio Zero Reverse Osmosis Replacement Filters Pack |
---|---|
In Depth | Filter Stages: 1 - Quick-Change Sediment Filter 5μm: removes coarse particles, e.g. Sand, rust, chlorine, lime 2 - Quick-Change Polyphosphate impregnated composite carbon filter: removes chlorine and organic impurities 3 - Quick-Change Membrane 50GPD: removes all pollutants and flavors to almost 100% 4 - Quick-Change Insertion Filters: Hygiene After-filter antibacterial: removes 99% of the bacteria and viruses Please Note: The filters may show a different label to the image shown, if you are unsure you have received the correct items please contact us with an image of the items you have received to into@osmiowater.co.uk and we will be able to further assist you. Please see images for how you could receive the filters. |
Filter Parameter | Bacteria, E-coli, Chlorine, Sediments, Nitrates, Fluoride, Limescale, Dissolved Solids (TDS), Hormones, Pharmaceuticals, Heavy Metals |